View EALP03SXCRA0-AM_9016822.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 copyright ? 2010, everlight americas inc. all rights reserved. release date : may.24, 201 3 issue no:1 www.everlight americas .com p - led ealp03sxcra0 - am feature ? lead - free ? rohs compliant. ? low profile. ? uniform color ? high flux output ? colorless clear resin. ? brightness: 7150 to 14250 m lm at 70 ma . ? qualification according to aec - q101. ? packaged in tubes for use with automatic inserti on equipment. ? useable in severe lead free processes with automotive reflow profile. ? compliance with eu reach . ? compliance halogen free .(br <900 ppm ,cl <900 ppm , br+cl < 1500 ppm). applications ? automotive exterior lighting : turn light, tail light , rear - v iew mirror light, side light, ? license light switch, 3 rd braking light etc. ? display for indoor and outdoor application. ? substitution of traditional light. ? electronic signs and signals. ? general applications. device selection guide chip emitted color resin color material algainp red water clear
datasheet p - led ealp03sxcra0 - am 2 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com table of content page absolute maximum ratings (ta=25 ) 3 electro - optical characteristics (ta=25 ) 4 bin range of dominant wavelength (ta=25 ) 5 bin range of forward voltage (ta=25 ) 6 bin range of total flux (ta=25 ) 7 typical electro - optical characteristics curves 8 package dimension s 10 antistatic packing materials tube and standard boxes 11 lable explanation 12 precautions 1 3 revision history 15
datasheet p - led ealp03sxcra0 - am 3 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com absolute maximum ratings (ta=25 parameter symbol rating unit reverse voltage v r 5 v continuous forward current i f 70 ma peak forward current (duty 1/10 @1khz) i fp 150 ma power dissipation pd 200 mw led junction temperature t j 12 0 operating temperature t opr - 40 ~ + 100 storage temperature t stg - 40 ~ +1 1 0 thermal resistance rth j - a 150 k/w electrostatic dis charge esd hbm esd mm 4000 200 v soldering temperature(t=5 sec) t sol 260 5
datasheet p - led ealp03sxcra0 - am 4 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com electro - optical characteristics (ta=25 parameter symbol min. typ. max. unit condition total flux v 7150 --- 14250 mlm i f = 70 m a peak wavelength p ----- 631 ----- nm i f = 70 ma dominant wavelength d 620 ----- 63 2 nm i f = 70 ma spectrum radiation bandwidth ? ----- 18 ----- nm i f = 70 ma viewing angle 2 1/2 ----- 40 ----- deg i f = 70 ma forward voltage v f 1.9 ----- 2.9 v i f = 70 ma reverse current i r ----- ----- 10 a v r =5v note: 1. tolerance of total flux : 11% 2. tolerance of dominant wavelength: 1nm 3. tolerance of forward voltage: 0.1v
datasheet p - led ealp03sxcra0 - am 5 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com bin range of forward voltage bin min. max. unit condition 1 1.9 2.1 v i f = 70 ma 2 2.1 2.3 3 2.3 2.5 4 2.5 2.7 5 2.7 2.9 note: tolerance of forward voltage: 0.1v
datasheet p - led ealp03sxcra0 - am 6 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com bin range of dominant wavelength note: tolera nce of dominant wavelength: 1nm bin min. max. unit condition 2 620 624 nm i f = 70 ma 3 624 628 4 628 632
datasheet p - led ealp03sxcra0 - am 7 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com bin ran ge of total flux bin min. max. unit condition t1 7150 9000 mlm i f = 70 ma t2 9000 11250 u1 11250 14250 note: tolerance of total flux : 11%
datasheet p - led ealp03sxcra0 - am 8 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com typical electro - optical cha racteristics curves typical c urve of s pectral d istribution relative intensity( ) wavelength (nm) note : v( )=standard eye response curve ; i f = 2 0ma diagram characteristics of r adiation relative intensity view angle 0 50 100 500 550 600 650 700 750
datasheet p - led ealp03sxcra0 - am 9 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com forward current vs. forw ard voltage (ta=25 ) dominant wavelength vs. forward current (ta=25 ) forward current (ma) dominant wavelength (nm) forward voltage (v) forward current (ma) relative luminous intensity vs. forward current (ta=25 ) max. permissible forward curren t vs. ambient temperature relative luminous intensity forward current (ma) forward current (ma) ambient temperature ( ) 0 10 20 30 40 50 60 70 80 90 100 1.7 1.9 2.1 2.3 2.5 2.7 619 620 621 622 623 624 625 0 10 20 30 40 50 60 70 80 90 100 0.0 0.3 0.6 0.9 1.2 1.5 0 10 20 30 40 50 60 70 80 90 100 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 80.0 90.0 100.0 0.0 20.0 40.0 60.0 80.0 100.0
datasheet p - led ealp03sxcra0 - am 10 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com package dimension note: 1. tolerances unless mentioned 0.25mm. unit = mm 2. an epoxy m eniscus may extend about 1.5mm(0.059") down the leads
datasheet p - led ealp03sxcra0 - am 11 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com antistic packing materials tube t ube label explanation ? qty: packing quantity ? lot no: lot number ? cat: rank of (vf)(note*)(v) note: d /cie/color temperature note: tolerances unle ss mentioned 2.0mm. unit = mm standard box outer label explanation ? cpn: customers product number ? p/n: product number ? qty: packing quantity ? cat: rank of (vf)(note*)(v) ? note: d /cie/color temperature ? hue/ref: reference ? lot no: lot number note : tolerances unless mentioned 3.0mm. unit = mm label area
datasheet p - led ealp03sxcra0 - am 12 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com packing quantity packing material length width height (mm) tube quantity (pcs) led quantity (pcs) tube 485 x 9.5 x 12 1 60 standard box 510 x 100 x 45 30 1800 large box 510 x 150 x 90 105 6300 note: 1. normal packing specification is use standard box, unless already defined initially. 2. vacuum packing with anti - static bag after packing in standard box. 3. specifications are subject to change without prior notice. notes 1. lead forming ? during le ad formation , the leads should be bent at a point at least 3mm from the base of the epoxy bulb. ? lead forming should be done before soldering. ? avoid stressing the led package during leads forming . the stress to the base may damage the leds characteristics or it may break the leds. ? cut the led leadframes at room temperature. cutting the leadframes at high temperatures may cause failure of the leds. ? when mounting the leds onto a pcb , the pcb holes must be aligned exactly with the lead position of the led. if the leds are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the leds. 2. storage ? the leds should be stored at 30c or less and 70%rh or less after being shipped from everlight americas and the storage life l imits are 3 months. if the leds are stored for 3 months or more, they can be stored for a year in a sealed container with a nitrogen atmosphere and moisture absorbent material. ? please avoid rapid transitions in ambient temperature, especially, in high humi dity environments where condensation can occur. 3. soldering ? careful attention should be paid during soldering. solder the led no lower than 1.6mm from the base of stopper is recommended. ? avoiding applying any stress to the lead frame while the leds are at hi gh temperature particularly when soldering.
datasheet p - led ealp03sxcra0 - am 13 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com ? recommended soldering conditions: hand soldering dip soldering temp. at tip of iron 3 00 max. (30w max.) preheat temp. 100 max. (60 sec max.) soldering time 3 sec max. bath temp. 26 0 max. distance n o lower than 1.6mm from the base of stop per bath time. 5 sec max. distance n o lower than 1.6mm from the base of stop per ? dip and hand sol dering should not be done more than one time . ? after soldering the leds, the epoxy bulb should be protected from mechanical shock or vibration until the leds return to room temperature. ? a rapid - rate process is not recommended for cooling the leds down from the peak temperature. ? although the recommended soldering conditions are specified in the above table, dip or handsoldering at the lowest possible temperature is desirable for the leds. ? wave soldering parameter must be set and maintain according to recommen ded temperature and dwell time in the solder wave. 4. cleaning ? when necessary, cleaning should occur only with isopropyl alcohol at room temperature for a duration of no more than one minute . dry at room temperature before use. ? do not clean the leds by the u ltrasonic. when it is absolutely necessary, the influence of ultrasonic cleaning on the leds depends on factors such as ultrasonic power and the assembled condition. ultrasonic cleaning shall be pre - qualified to ensure this will not cause damage to the led 5. heat management ? heat management of leds must be taken into consideration during the design stage of led application. the current should be de - rated appropriately by referring to the de - rating curve found in each product specification. ? the temperature surr ounding the led in the application should be controlled. please refer to the data sheet de - rating curve. 6. esd (electrostatic discharge) ? electrostatic discharge (esd) or surge current (eos) can damage leds. ? an esd wrist strap, esd shoe strap or antistatic gl oves must be worn whenever handling leds. ? all devices, equipment and machinery must be properly grounded. ? use ion blower to neutralize the static charge which might have built up on surface of the leds plastic le ns as a result of friction between leds duri ng storage and handing .
datasheet p - led ealp03sxcra0 - am 14 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com 7. other ? above specification may be changed without notice. everlight americas will reserve authority on material change for above specification. ? when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight americas assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sh eets. ? these specification sheets include materials protected under copyright of everlight americas corporation. please dont reproduce or cause anyone to reproduce them without everlight americas s consent.
datasheet p - led ealp03sxcra0 - am 15 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 24, 201 3 issue no:1 www.everlight americas .com revision history rev. modified date file modified contents 2 2013/5/24 change the form of datasheet

▲Up To Search▲

Price & Availability of EALP03SXCRA0-AM

	To Download EALP03SXCRA0-AM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .